File: D:/HostingSpaces/PHerau/ha.health-science.be/wwwroot/Portals/_default/Logs/2023.06.29.log.resources
2023-06-29 05:01:01,216 [YDAWBH120][Thread:20][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2007.31425, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2007.31425, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.DialogDefinition.get_DialogType()
at Telerik.Web.UI.DialogHandlerNoSession.LoadDialogControl()
at Telerik.Web.UI.DialogHandlerNoSession.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at Telerik.Web.UI.DialogHandlerNoSession.OnPreLoad(EventArgs e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.providers_htmleditorproviders_telerik_telerik_web_ui_dialoghandler_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
2023-06-29 05:01:01,317 [YDAWBH120][Thread:8][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2013.1.403, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2013.1.403, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.DialogDefinition.get_DialogType()
at Telerik.Web.UI.DialogHandlerNoSession.LoadDialogControl()
at Telerik.Web.UI.DialogHandlerNoSession.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at Telerik.Web.UI.DialogHandlerNoSession.OnPreLoad(EventArgs e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.providers_htmleditorproviders_telerik_telerik_web_ui_dialoghandler_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
2023-06-29 12:22:21,145 [YDAWBH120][Thread:58][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.Web.HttpException (0x80004005): The file '/util/login.aspx' does not exist.
at System.Web.UI.Util.CheckVirtualFileExists(VirtualPath virtualPath)
at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)
at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)
at System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean throwIfNotFound)
at System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp)
at System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath)
at System.Web.UI.PageHandlerFactory.GetHandler(HttpContext context, String requestType, String virtualPath, String path)
at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
2023-06-29 16:50:29,957 [YDAWBH120][Thread:33][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:30,766 [YDAWBH120][Thread:44][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:30,776 [YDAWBH120][Thread:74][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:30,939 [YDAWBH120][Thread:44][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:31,479 [YDAWBH120][Thread:33][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:31,492 [YDAWBH120][Thread:33][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:33,419 [YDAWBH120][Thread:74][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:34,061 [YDAWBH120][Thread:33][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:34,449 [YDAWBH120][Thread:74][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:35,476 [YDAWBH120][Thread:44][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:35,507 [YDAWBH120][Thread:74][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 16:50:35,701 [YDAWBH120][Thread:44][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:01,446 [YDAWBH120][Thread:29][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:02,683 [YDAWBH120][Thread:39][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:02,933 [YDAWBH120][Thread:32][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:02,969 [YDAWBH120][Thread:74][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:03,726 [YDAWBH120][Thread:48][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:03,743 [YDAWBH120][Thread:29][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:05,100 [YDAWBH120][Thread:32][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2018, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:06,343 [YDAWBH120][Thread:74][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2017, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:06,805 [YDAWBH120][Thread:63][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2014, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:07,063 [YDAWBH120][Thread:39][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2016, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:07,858 [YDAWBH120][Thread:33][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2012, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
2023-06-29 17:15:07,869 [YDAWBH120][Thread:44][FATAL] DotNetNuke.Web.Common.Internal.DotNetNukeHttpApplication - System.IO.FileLoadException: Could not load file or assembly 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
File name: 'Telerik.Web.UI, Version=2015, Culture=neutral, PublicKeyToken=121fae78165ba3d4'
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
at System.Type.GetType(String typeName)
at Telerik.Web.UI.AsyncUploadHandler.GetConfiguration(String rawData)
at Telerik.Web.UI.AsyncUploadHandler.EnsureSetup()
at Telerik.Web.UI.AsyncUploadHandler.ProcessRequest(HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(String handlerKey, HttpContext context)
at Telerik.Web.UI.HandlerRouter.ProcessHandler(HttpContext context)
at Telerik.Web.UI.WebResource.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].